Thermaltake Water 3.0 240 ARGB Sync 240mm CPU Liquid Cooler
Out of stock
Thermaltake Water 3.0 240 ARGB Sync 240mm AIO
Thermaltake Water 3.0 240 ARGB Sync 240mm AIO is an all-in-one cooling solution which comes in 3 variants that is 120mm, 240mm and 360mm. Thermaltake Water 3.0 240 ARGB Sync 240mm AIO cooler provides an alternative cooling solution to the standard air cooling.
This is a perfect choice for cooling for heavy gaming users. It comes with RGB lighting with pure ARGB 5V radiator fans with compression blades. Switching between these lightening effects and 16.8 million color LED rings with 9 addressable LEDs options have never been this easy. The high efficiency radiator is made especially for large surface radiator which increase the cooling surface and controls the heat inside.
The waterblock made up of copper base plate had a pre-filled coolant to reduce any stress from liquid having the best durability and it also prevents the tubes from any kind of damages.
The cooler also has a pump which enables the water circulation at maximum level and keep the copper plate cool. The length of the tube is 326mm and is made up of rubber.
The installation is made very easy for the user with a maintenance free operation. It comes with a pre-applied thermal paste at the base of the waterblock which allows for stress free placements. It has over-clocking feature which gives your PC the higher cooling performance through a liquid cooling solution.
A CPU is the heart beat of gaming which always requires the best performance and hardware.
The cooler comes with 3 years of manufacturer warranty. Compatibility requirements: Intel LGA 2066/ 20113/ 2011/ 1366/ 1156/ 1155/ 1151/ 1150, AMD FM2/ FM1/ AM4/ AM3+/ AM3/ AM2+/ AM2.
Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.
Pure 12 ARGB Sync Radiator Fan
Water 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.
Switch LED Modes with ARGB Controller
The ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speeds options.
*The maximum signal output for one controller is 90 addressable LEDs.
High Efficiency Radiator
Specially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation.
High Performance Waterblock
The high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.
High Quality Pump
The high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.
Featuring the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.
|Pump||Motor Speed: 3600 RPM
Rated Voltage: 12 V & 5V
Power Input: 12V – 3.9 W , 5V – 1.06 W
|Water Block||Material: Copper|
|Fan||Dimension: 120 x 120 x 25 mm
Speed: PWM 500~1500 R.P.M (2510-4PIN)
Noise Level: 25.8 dB-A
Rated Voltage: 12 V & 5V
Power Input: 12V- 1.44 W, 5V – 1.6W (one fan)
Max. Air Flow: 56.45 CFM
Max. Pressure: 1.59 mm-H2O
LED Control: ARGB controller or 5V addressable RGB header on motherboard
|Radiator||Dimension: 270 x 120 x 27 mm|
FM2/FM1/AM4/AM3 /AM3/AM2 /AM2
|Note||***Features, Price and Specifications are subject to change without notice.|
|CPU Cooler Lighting|
|CPU Cooler Model|
|CPU Cooler Radiator Type|
|CPU Cooler Type|
Only logged in customers who have purchased this product may leave a review.