Thermaltake Versa J25 RGB Mid Tower Cabinet
Out of stock
THERMALTAKE VERSA J25 RGB CABINET
Thermaltake Versa J25 Tempered Glass RGB Edition is an ATX mid-tower cabinet from Thermaltake. The custom-built tempered glass panel and an angular front acrylic panel help the Thermaltake Versa J25 Tempered Glass RGB Edition to maintain a lower temperature with good airflow. The cabinets include 4 pre-installed fans out of which three of them are 12V 120mm RGB fans on the front panel. The back panel has a standard 120mm fan. The fans support multi-color options. The RGB button on the case can be used to control the lighting mode of the 3 RGB fans. The lighting modes include the RGB color cycle, single color static, and breathing modes. The RGB switchboard is built-in the Thermaltake Versa J25 Tempered Glass RGB Edition is able to deliver ultimate RGB lighting customization through the I/O port button or syncing with supported motherboards from Asus, Gigabyte, or MSI.
The built-in PSU cover of the Thermaltake Versa J25 Tempered Glass RGB Edition makes sure to hide away the cable clutter while maintaining proper ventilation for the PSU. The left side of the Thermaltake Versa J25 Tempered Glass RGB Edition features the side tempered glass panel, which is more durable and scratch-resistant than the acrylic side panels, which can be attached firmly with just 2 screws on the rear panel. The Tool-Free drive bays allow you to add or remove drives without the need for tools. The Thermaltake Versa J25 Tempered Glass RGB Edition supports up to seven drives being 2 behind the motherboard. The superior hardware support and cooling capability make it suitable for high-end enthusiast level builds.
Thermaltake Versa J25 Tempered Glass RGB Edition Mid-Tower Chassis
Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement.
3 Built-in 120mm 12V RGB Fans
Versa J25 TG RGB is preinstalled with three 120mm 12V RGB fans that can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different color options.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software.
Built-in RGB Switch Board
Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.
Built-in PSU Cover
The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.
Tempered Glass Window
The left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels.
The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives.
|Model||Versa J25 TG RGB|
|Case Type||Middle tower|
|Dimension (H x W x D)||461 x 206 x 402 mm(18.1 x 8.1 x 15.8 inch)|
|Net Weight||6.2 kg / 13.67 lb|
|Side Panel||4mm Tempered Glass x1|
|Color||Exterior & Interior : Black|
|Cooling System||Rear (exhaust) : 120 x 120 x 25 mm fan(1000rpm, 16dBA)Front (intake) : 120 x 120 x 25 mm RGB fan x3 (1000rpm, 16dBA)|
|Accessible||2 x 2.5”(HDD Bracket)|
|Hidden||3 x 3.5“ or 2.5” (HDD Tray)|
|Motherboards||6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)|
|I/O Port||USB 3.0 x 2, HD Audio x 1|
|PSU||Standard PS2 PSU (optional)|
|Fan Support||Front: 3 x 120mm, 2 x 140mmTop: 2 x 120mm, 2 x 140mmRear: 1 x 120mm|
|Radiator Support||Front: 1 x 360mmRear: 1 x 120mm|
|Clearance||CPU cooler height limitation: 160mmVGA length limitation: 330mmPSU length limitation: 160mm|
|Note||***Features, Price and Specifications are subject to change without notice.|
|Cabinet Form Factor|
|Cabinet Radiator Support|
|Cabinet Side Panel Type|
Only logged in customers who have purchased this product may leave a review.