Out of stock
Crucial BX500 120GB SATA III 2.5″ Internal SSD
The Crucial BX500 120GB 3D NAND SATA III SSD is a high-speed storage device from Micron technology for all your data with improved performance. The Crucial BX500 120GB SSD increases overall system responsiveness with faster boot times and quicker file load times. The BX500 features a 2.5-inch form factor which allows it to be quite small and very silent. The BX500 SSD can work with any system and fit inside any case. The Crucial BX500 120GB 3D NAND SATA III SSD works with any system and can perform smoothly under extreme workloads making it super reliable. The sequential read of the Crucial BX500 is 540MB/s while the write speed of the BX500 is 500MB/s making it suitable for running systems faster and efficiently with the low response time.
The Crucial BX500 uses a 6.0Gb/s connector for all the high speed read and write. The Crucial clone software allows you to copy, and move data from your old storage devices into the new device with ease. With a simple interface and guided process of cloning important system data, the data retrieval process has become easier with the Crucial BX500 SSD. The Crucial BX500 120GB 3D NAND SATA III SSD with thousands of hours of pre-release validation and a heritage of award-winning SSD’s, BX500 comes with a 3-year warranty with an award-winning technical support team to any assistance.
- Boot up faster, load files more quickly, and improve overall system responsiveness
- Up to 300% faster than a traditional spinning hard drive
- Improves battery life because it is more energy efficient than a traditional spinning hard drive
- Built using Micron 3D NAND
- A limited 3-year warranty is valid from the original date of purchase or before writing the drive’s maximum total bytes written (TBW), whichever comes first
Store and access your files quickly and efficiently with the 120GB BX500 SATA III 2.5″ Internal SSD from Crucial. This solid-state drive supports sequential read speeds up to 540 MB/s and sequential write speeds up to 500 MB/s, making it easy to transfer large files quickly. Furthermore, you can boot up your system quicker, load files quicker, and improve your overall system performance. This SSD will fit into 2.5″ drive bays that support drive heights of 7mm. Also featured is a SATA III 6 Gb/s interface, a 1.5 MTTF (mean time to failure) rating, a Micron 3D NAND technology.
|Drive Capacity||120.00 GB|
|Interface||SATA III (6 Gb/s)|
|Maximum Read Speed||540 MB/s|
|Maximum Write Speed||500 MB/s|
|Form Factor||2.5″ (7 mm)|
|SSHD Cache Amount||None|
|Mean Time Between Failures (MTBF)||1.5 Million Hours|
|Power Draw||60.00 mW (Active)|
|Operating Temperature||32 to 158°F / 0 to 70°C|
|Certifications||BSMI, CE, FCC, Kcc, RoHS, TUV, UL, VCCI, WEEE, as per Manufacturer|
|Dimensions (W x H x D)||3.8 x 5.0 x 0.5″ / 9.7 x 12.7 x 1.3 cm|
|Weight||1.9 oz / 53.9 g|
|Package Weight||0.15 lb|
|Box Dimensions (LxWxH)||5.25 x 4.0 x 0.5″|
|Storage interface type||
There are no reviews yet.